Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LAB 1.42MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Lab, 1.42 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LAB 2.54MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Lab, 2.54 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LAB 2.79MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Lab, 2.79 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LAB 1.85MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Lab, 1.85 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TBNG TYGON 2001 1.02MM ID 33FT
Masterflex Ismatec Pump Tubing, Versilon™ 2001, 1.02 mm ID x 2.72 mm OD; 33 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TBNG TYGON 2001 0.38MM ID 33FT
Masterflex Ismatec Pump Tubing, Versilon™ 2001, 0.38 mm ID x 2.18 mm OD; 33 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LAB 3.19MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Lab, 3.17 mm ID; 12/PK, Avantor
Holland Applied Technologies C-FLEX374 TUBING .125X.25 50FT
This item must be ordered in multiples of 8 per supplier requirements
Accuflow Systems 3/8ID X 1/2OD FEP 50FT/ROLL
*Chemically inert *Documented biocompatibility *Pharmafluor is fully characterized to all current standards *Non-cytotoxic, non-pyrogenic and non-hemolytic *Extremely low sorption characteristics compared to other flexible tubings *Fully autoclavable and sterilizable *Excellent barrier with very low permeability
Braintree Scientific Polyethylene .017"""" x .030"""" Per Ft.,1000 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Braintree Scientific Polyethylene .023"""" x .038"""" Per Ft., 50 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Braintree Scientific Polyethylene .017"""" x .030"""" Per Ft.,100 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Braintree Scientific Polyethylene .023"""" x .038"""" Per Ft.,200 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**